LAMINATES: DK, DF AND TRACE WIDTH
What are the Dk and Df of Rogers RO3003?
Rogers RO3003 has a dielectric constant (Dk) of 3 and a loss factor (Df) of 0.001 at 10 GHz, as published by its maker. A 50 ohm surface microstrip over a 0.2 mm dielectric comes out about 0.469 mm wide on it, against 0.353 mm on standard FR-4.
- Dielectric loss on that microstrip is about 0.031 dB per inch at 10 GHz, and the signal travels at about 130 ps per inch.
- Buried as a stripline between planes 0.4 mm apart, 50 ohms needs a trace about 0.191 mm wide.
50 ohm surface microstrip, 1 oz copper
| Dielectric height | Trace width on RO3003 | On standard FR-4 |
|---|---|---|
| 0.1 mm | 0.223 mm | 0.166 mm |
| 0.2 mm | 0.469 mm | 0.353 mm |
| 0.5 mm | 1.22 mm | 0.920 mm |
| 1.6 mm | 3.97 mm | 3.02 mm |
As published
| Property | Value |
|---|---|
| Series | RO3000 |
| Dk @ 10GHz | 3.00 |
| Df @ 10GHz | 0.0010 |
| TCDk (ppm/°C) | −3 |
| Thermal Cond. (W/m·K) | 0.50 |
| Key Application | 77GHz radar, mmWave 5G |
How this was counted
Dk and Df are the maker's published values at 10 GHz, from the MPBxChange material catalogue, which keeps each source's test frequency and method. Where a maker publishes a range, the midpoint is used. Widths are solved with the Hammerstad and Jensen microstrip equations and Wadell's stripline form, for 1 oz copper, and are a starting point: Dk moves with frequency, resin content and glass style, and a fabricator's field solver is the authority. Standard FR-4 here is the median of 22 FR-4 grades in the catalogue (Dk 4.4).